Our Work

Engineering Case Studies

Structural verification, lifting equipment certification support, bolt and weld modelling, buckling, fatigue root-cause and thermal analysis — how we have solved real engineering problems for our clients.

3D model of a steel support frame for a row of solar panels on concrete foundation blocks
Structural Integrity Analysis

Solar Panel Structure

Eurocode verification and redesign of a steel framework supporting a ground-mounted solar panel installation.

Read case study
Modal FEA stress plot of the leveling beam next to a photo of the cracked beam in service
Failure & Fatigue Investigation

Leveling Beam

Root-cause investigation of a cracked concrete leveling beam: vibrator frequencies were exciting the beam's natural frequency.

Read case study
Diagram of a two-point lift with center-of-gravity offset and the derived CoG load factor equations
Critical Lifting Operations

Rigging Safety Verification

Verification of a custom lifting configuration where center-of-gravity uncertainty drove sling forces, aligned with ISO 19901-5.

Read case study
Four FEA models of a bolted lifting lug: 3D solid bolts, beam connections, joint connections and spring connections
Lifting Connection Verification

Advanced Modelling for Bolted Connections

Comparison of solid, beam, joint and spring bolt models to verify bolted lifting connections accurately and quickly.

Read case study
Base plate stress results for line (1D) and solid (3D) bolt models with a table comparing bolt axial, shear and bending forces
1D vs 3D Finite Elements

Comparative Bolt Modelling Verification

Side-by-side FEA study of 1D beam bolts versus 3D solid bolts under identical pretension and bearing loads.

Read case study
Welded lifting lug modelled four ways in FEA: 3D solids, shells, constraints and contacts
Structural Integrity Verification

Weld Modelling Strategy

Selecting the right weld modelling method — solids, shells, constraints or contacts — for realistic load paths and fatigue stresses.

Read case study
Beam deflection results for solid, shell and beam elements (about 0.52 mm) compared with the hand calculation PL³/48EI = 0.51 mm
Solids, Shells & Beams Validation

Comparative Structural Analysis

Validation of solid, shell and beam element results against hand calculations under identical loading.

Read case study
FEA stress plots of a heavy cylindrical vessel for service, storage, lifting, rail, road and sea transport load cases
Full Lifecycle Compliance

Multi-Scenario Transport & Lifting Verification

Service, storage, lifting and rail, road and sea transport load cases for heavy equipment under Eurocode and DNV.

Read case study
FEA stress plot of a spreader lifting beam with slings and end lifting points
Custom Lifting Equipment

Accelerated Certification Support

Rigging calculations and FEA of custom lifting equipment against EN 13155, DNV and the Machinery Directive on a tight deadline.

Read case study
Solid mechanical bracket before optimization next to the lightweight organic shape after topology optimization
Lightweight Industrial Components

Structural Optimization

Simulation-driven topology optimization of a load-bearing bracket to cut weight while keeping strength and stiffness.

Read case study
Transient thermal FEA temperature plots of a magnetometer sensor block on standoffs and of the full housing
Thermal Gradient Verification

Magnetometer Thermal Analysis

Transient thermal FEA of a magnetometer to control internal temperature gradients that affect measurement accuracy.

Read case study
Eigenvalue buckling mode shape of a slender column with its load multiplier
Structural Stability Assessment

Linear & Nonlinear Buckling Verification

Eigenvalue and geometrically nonlinear buckling analysis with imperfections to find the true stability margin of a compression member.

Read case study

Have a similar engineering challenge?

Send us a short description, drawings or CAD and the standard you need to meet. We reply within 24 hours.

Contact Us