Lifting Equipment & Rigging Verification
Rigging calculations and FEA verification of lifting beams, lugs, bolted connections and custom lifting equipment — including tight certification deadlines.
Lifting equipment has to be demonstrably safe before it is used, and the calculations are often on the critical path to certification. We verify lifting beams, spreader bars, lifting lugs, bolted and welded connections and complete rigging arrangements, and document the results for review.
Our work covers sling force and lifting point calculations — including the effect of center-of-gravity uncertainty — as well as FEA of the equipment itself. For heavy equipment we also verify storage, road, rail and sea transport load cases, including longitudinal, transverse and quartering accelerations.
Verification is carried out against the applicable requirements, such as EN 13155, DNV, ISO 19901-5, Eurocode and the Machinery Directive 2006/42/EC.
What we analyze
- Rigging and sling force calculations with CoG uncertainty
- FEA of lifting beams, spreader bars and lifting lugs
- Bolted and welded lifting connections
- Transport load cases: road, rail and sea
- Support for accelerated certification timelines
What you receive
- Calculation and FEA report structured for certification review
- Utilization and safety factors per standard and load case
- Recommendations where margins are insufficient
Lifting Equipment & Rigging Verification case studies

Rigging Safety Verification
Verification of a custom lifting configuration where center-of-gravity uncertainty drove sling forces, aligned with ISO 19901-5.
Read case study
Advanced Modelling for Bolted Connections
Comparison of solid, beam, joint and spring bolt models to verify bolted lifting connections accurately and quickly.
Read case study
Comparative Bolt Modelling Verification
Side-by-side FEA study of 1D beam bolts versus 3D solid bolts under identical pretension and bearing loads.
Read case study
Multi-Scenario Transport & Lifting Verification
Service, storage, lifting and rail, road and sea transport load cases for heavy equipment under Eurocode and DNV.
Read case study
Accelerated Certification Support
Rigging calculations and FEA of custom lifting equipment against EN 13155, DNV and the Machinery Directive on a tight deadline.
Read case study